Copy Lun-Group - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > copy lun-group

copy lun-group

This command copies a LUN group.
■
Syntax
copy lun-group -name
{-source-lg-number
■ Parameter
-name
-source-lg-number
or
-source-lg-name
■
Example(s)
The following example copies the definitions contained in the LUN group named "LUN001", and creates a
new LUN group named "LUN002" with those same definitions:
CLI> copy lun-group -name LUN002 -source-lg-name LUN001
name
source_lg_number
| -source-lg-name
This parameter specifies the LUN group name of the target LUN group. Only one name can be
specified at the same time.
name
New LUN group name
This parameter specifies the LUN group identifier which is the source of the copy. Only one LUN
group can be specified at the same time. For details, refer to
28).
source_lg_number
LUN group number
source_lg_name
LUN group name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
source_lg_name
330
}
"1.2.12 LUN Group Syntax" (page
P2X0-1210-05ENZ0