Fujitsu Eternus DX100 S3 User Manual page 860

Appendix A Error Messages/Error Codes
A.1 Error Messages
Message
number
EBE42
EBE43
EBE70
EBE71
EBE72
EBE73
EBE74
EBE75
EBE80
EBE81
EBE82
EBE90
EBE91
EBEA0
EBEA1
EBEA2
EBEA3
EBEA4
EBEA5
EBEA6
The primary DNS server information is not set.
The primary DNS server information is not set.
Specified NAS interface is not assigned to port.
The specified NAS interface is not assigned to a port.
The specified port is the master port for the bonding.
The specified port is the master port for the bonding process.
The specified port is the member port for the bonding.
The specified port is the member port for the bonding process.
The specified port is not the master port for the bonding.
The specified port is not the master port for the bonding process.
The specified port is not the member port for the bonding.
The specified port is not the member port for the bonding process.
The specified port is a port on a different CM.
The specified port is a port on a different CM.
The number of member ports exceeds the maximum number of registrations.
The number of member ports exceeds the maximum number of registrations.
The specified port belong to the multi-path.
The specified port is set for a multipath.
The specified port is not multi-path pair.
The specified port is not set for a multipath.
The specified port is installed in the same CM.
The specified port is a port in the same CM.
The server settings conflicted.
The server settings are duplicated.
Some required settings are not specified.
Some required settings are not specified.
The specified route is already registered.
The specified route is already registered.
The specified route is not registered.
The specified route is not registered.
The specified gateway cannot be accessed.
The specified gateway cannot be accessed.
The host address or the interface ID portion of the IP address should be zero.
The host address portion or interface ID portion of the IP address is not zero.
The destination address is the same as the interface address.
The target address is the same as the interface address.
The gateway address is the same as the interface address.
The gateway address is the same as the interface address.
The specified destination address is incorrect.
The specified destination address is incorrect.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Message
Countermeasure for the error
860
P2X0-1210-05ENZ0