Create Snmp-View - Fujitsu Eternus DX100 S3 User Manual

Fujitsu eternus cli user's guide
Hide thumbs Also See for Eternus DX100 S3:
Table of Contents

Advertisement

Chapter 5 System Settings and Display
5.2 Network Management > create snmp-view

create snmp-view

This command creates an SNMP Management Information Base view (MIB view). A MIB is a data base which
has a tree structure, and the MIB view defines a set of sub-trees for a MIB. MIB views are used to define access
scope. A maximum of ten MIB views can be created. ETERNUS DX has three default view settings. These
entries can also delete and modify as same as other entries. These default values are described in the "show
snmp-view" section.
Regarding the SNMP sub-trees name, the following rules apply for descriptions.
Up to 251 characters can be specified.
Names must be specified as a combination of numbers and periods (.). Example: "1.3.5"
A combination of numbers and periods (.) must be used. At least one period (.) must be used. Example:
"15" is NG.
The number "0" cannot be specified between period (.) characters. Example: "1.0.1" is NG.
Numbers that begin with 0 cannot be specified. Example: "1.01.1" is NG.
Syntax
create snmp-view -view
subtree3
[-subtree3 {
subtree6
[-subtree6 {
subtree9
[-subtree9 {
[-include-subtree
Parameter
-view
-subtree1
. . .
-subtree10
view_name
[-subtree1 {
subtree4
| ""}] [-subtree4 {
subtree7
| ""}] [-subtree7 {
subtree10
| ""}] [-subtree10 {
subtree_numbers
] [-exclude-subtree
This parameter specifies the MIB view name. A maximum of 10 MIB views can be specified. It is
a unique name. Up to 32 characters can be specified for a view name.
view_name
MIB view name
Optional. These parameters specify the accessible sub-trees that make up the specified MIB
view (up to 10 sub-trees). If this parameter is omitted or a null character ("") is specified, the
subtree is deleted. Each sub-tree must be unique. If duplex is specified, the command
terminates with an error.
subtree1
subtree10
...
Accessible sub-trees
""
The subtree is deleted.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
subtree1
| ""}] [-subtree2 {
subtree5
| ""}] [-subtree5 {
subtree8
| ""}] [-subtree8 {
| ""}]
subtree_numbers
518
subtree2
| ""}]
| ""}]
| ""}]
]
P2X0-1210-05ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents