Delete Snap-Data-Pool-Volume - Fujitsu Eternus DX100 S3 User Manual

Chapter 4 Copy Function Settings and Display
4.1 Advanced Copy Management > delete snap-data-pool-volume

delete snap-data-pool-volume

This command deletes Snap Data Pool Volumes (SDPV). Other volume types cannot be deleted by this
command.
■ Syntax
delete snap-data-pool-volume {-volume-number
-mode {force | reservation}
■ Parameter
-volume-number
or
-volume-name
-mode
■ Example(s)
The following example forcibly deletes the SDPV named "SDPV1":
CLI> delete snap-data-pool-volume -volume-name SDPV1 -mode force
The following example deletes SDPV #1 through #10 when the SDPE is no longer used:
CLI> delete snap-data-pool-volume -volume-number 1-10 -mode reservation
This parameter specifies the SDPV identifiers to be deleted. One or more volumes can be
specified at the same time. For details, refer to
volume_numbers
SDPV number
volume_names
SDPV name
This parameter specifies the deletion mode.
force The SDPV is immediately deleted even when an SDP element (SDPE) has been
assigned to it. Up to 128 volumes can be specified at the same time.
reservation The SDPV is deleted when the SDPE is no longer used.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
volume_numbers
| -volume-name
"1.2.10 Volume Syntax" (page
413
volume_names
}
26).
P2X0-1210-05ENZ0