Set Community-Profile - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.2 Network Management > set community-profile

set community-profile

This command modifies community profiles to add or to delete SNMP managers.
■
Syntax
set community-profile -community
view_name
[-view {
■ Parameter
-community This parameter specifies the SNMP community name, which can contain up to 32
-name
-view
-manager-number
community_name
|""}] [-manager-number {
alphanumeric characters. Only one community name can be specified at the same time.
If the SNMP community name includes a space ( ), it must be enclosed by double quotation
marks ("). Double quotation marks are included in the character count.
Example: -community "community 001" (using 15 letters)
community_name
SNMP community name
Optional. This parameter specifies a new community name for a community that already
exists.
new-community-name
New SNMP community name
Optional. This parameter specifies the SNMP MIB view name that is accessible by members of
the community. If the specified community is changed to be used for traps only, specify a null
character ("") instead of a view name.
view_name SNMP MIB view name
"" The specified community is changed to be used for traps only.
Optional. This parameter specifies the number of SNMP managers.
Any value between 1 and 10 can be specified. This number can be confirmed by using the
"show snmp-manager" command. One or more numbers can be specified using "," or "-". If
unlimited access is specified for the community, specify "none" instead of a manager number.
manager_numbers
SNMP manager number (1 – 10)
none Unlimited access is specified for the community.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
new-community-name
[-name
manager_numbers
|none}]
535
]
P2X0-1210-05ENZ0