Create Volume - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.2 Volume Management > create volume

create volume

This command creates volumes in the specified RAID group. When creating two or more volumes at a time,
they can be created in one RAID group based on the "-name" and the "-count" parameters. The created
volumes are formatted automatically.
The "create flexible-tier-volume" command is used to create Flexible Tier Volumes (FTVs).
Encryption-related functions may not be available for some user environments.
■ Syntax
create volume -name
{-pool-number
-type {open|standard|sdv|sdpv|tpv|wsv|nas-tpv|nas-tpv-backup}
size
[-size { {tb|gb|mb}|max}| -virtual-size
[-copy-protection {enable | disable}] [-attention
[-wide-stripe-size {normal | small}] [-concatenation-order {auto | manual}]
[-volume-number
■ Parameter
-name
-rg-number
or
-rg-name
-pool-number
or
-pool-name
name {-rg-number
pool_number
| -pool-name
volume_number
] [-exc {enable|disable}]
This parameter specifies a volume name. For details, refer to
26).
name
Volume name
This parameter specifies a RAID group identifier to create new volumes. Note that multiple
RAID groups can be specified when "-type wsv" is set. For details, refer to
Syntax" (page 25). This parameter cannot be specified when the "-type tpv" parameter,
the "-type nas-tpv" parameter, or the "-type nas-tpv-backup" parameter is specified.
rg_number
RAID group number
rg_name
RAID group name
This parameter specifies a Thin Provisioning Pool identifier to create new volumes. For details,
refer to "1.2.6 Thin Provisioning Pool Syntax" (page
the "-type tpv" parameter, the "-type nas-tpv" parameter, or the "-type nas-tpv-backup"
parameter is specified.
pool_number
Thin Provisioning Pool number
pool_name
Thin Provisioning Pool name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
rg_number | -rg-name rg_name
pool_name
}
virtual_size
{tb|gb|mb}] [-count
attention
] [-encryption {enable|disable}]
23). This parameter can be specified when
119
}
count
]
"1.2.10 Volume Syntax" (page
"1.2.9 RAID Group
P2X0-1210-05ENZ0