Delete Community-Profile - Fujitsu Eternus DX100 S3 User Manual

Fujitsu eternus cli user's guide
Hide thumbs Also See for Eternus DX100 S3:
Table of Contents

Advertisement

Chapter 5 System Settings and Display
5.2 Network Management > delete community-profile

delete community-profile

This command deletes an SNMP community profile and/or deletes SNMP managers from community profile.
This command is not available when the SNMP manager setting that is to be deleted is already used for an
SNMP trap.
The community-profile "community4" has 3 manager settings #1 – #3.
When deleting all of the settings using "-manager-numbers 1-3", not only the manager settings on the
profile setting, but also the community profile are deleted.
The result is the same as when "-community community4" is specified.
Syntax
delete community-profile -community
Parameter
-community This parameter specifies the SNMP community name of profiles to be deleted. Only one
-manager-number
Example(s)
The following example deletes all the SNMP community profiles whose name is "community1":
CLI> delete community-profile -community community1
The following example deletes SNMP manager number 4 from community2:
CLI> delete community-profile -community2 -manager-number 4
community_name
community name can be specified at the same time.
community_name
SNMP community name
Optional. This parameter specifies the manager number.
Any value between 1 and 10 can be specified. This number can be confirmed by using the
"show snmp-manager" command. One or more numbers can be specified by separating them
with a comma (,) or a hyphen (-). If omitted, all the profiles that contain the specified SNMP
community name are deleted.
manager_numbers
SNMP manager number (1 – 10)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
[-manager-number
537
manager_numbers
]
P2X0-1210-05ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents