Test Nas-Ping - Fujitsu Eternus DX100 S3 User Manual

Chapter 7 NAS Function Setting and Display
7.8 Network Connection Testing > test nas-ping

test nas-ping

This command checks the network connection between an ETERNUS DX and the remote host (IPv4).
■
Syntax
test nas-ping -host {
■ Parameter
-host
-nas-if-number
■ Example(s)
CLI> test nas-ping -host 10.17.78.15
PING 10.17.78.15 (10.17.78.15) 56(84) bytes of data.
64 bytes from 10.17.78.15: icmp_seq=1 ttl=123 time=1.00 ms
64 bytes from 10.17.78.15: icmp_seq=2 ttl=123 time=0.997 ms
64 bytes from 10.17.78.15: icmp_seq=3 ttl=123 time=0.993 ms
64 bytes from 10.17.78.15: icmp_seq=4 ttl=123 time=1.01 ms
64 bytes from 10.17.78.15: icmp_seq=5 ttl=123 time=0.979 ms
--- 10.17.78.15 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 3999ms
rtt min/avg/max/mdev = 0.979/0.997/1.016/0.030 ms
ip_address host_name
|
This parameter specifies the target host, in which the connection is to be checked, using the IP
address or the host name.
ip_address IP address
Example: -host 10.20.30.40
host_name
Host name
Example: -host www.example.com
This parameter specifies the interface from which packets are to be sent.
nas-if-number
Existing NAS interface number
-nas-if-number 0
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
nas-if-number
} -nas-if-number
801
P2X0-1210-05ENZ0