Fujitsu Eternus DX100 S3 User Manual page 61

Chapter 2 Status Display
2.1 Storage System Status > show fru-de
DE#n FEM#m Internal Parts Status/Status Code (n: The drive enclosure number, m: The FEM number)
(Information on FEM#1 appears regardless of the number of controller modules)
FEM EXP#0 Port
Error Code
FEM EXP#1 Port
Error Code
DE#n FEM#m EXP#l Information (n: The drive enclosure number, m: The FEM number, I: The EXP num-
ber)
(Information on FEM#1 appears regardless of the number of controller modules)
Status/Status Code
Error Code
WWN
Active EC
Next EC
Firmware Version
The following table shows the output information for the power supply units.
Status/Status Code
Error Code
FEM (EXP#0) status and the status code
Error code to identify error events that occurred in port#0.
This information is only displayed when the Status is not "Normal" or "Undefined".
FEM (EXP#1) status and the status code
Error code to identify error events that occurred in port#1.
This information is only displayed when the Status is not "Normal" or "Undefined".
EXP (EXP#l) status and the status code
Error code to identify error events that have occurred in an expander in the Fan Expander
Module.
This information is only displayed when the Status is not "Normal" or "Undefined".
World Wide Name
EC number of the active firmware (the current operating firmware)
EC number of the stand-by firmware (the generation number of the firmware after the
next power cycle)
Version of the active firmware (the current operating firmware)
Power supply unit (PSU#n) status and the status code
Error code to identify error events that occurred in a power supply unit.
This information is only displayed when the Status is not "Normal" or "Undefined".
61
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0