Fujitsu Eternus DX100 S3 User Manual page 418

Chapter 4 Copy Function Settings and Display
4.1 Advanced Copy Management > show advanced-copy-sessions
Transfer Mode
Recovery Mode
Split Mode
Remote Session-ID
Remote Box-ID
Time Stamp Time stamp is displayed in local time.
Elapsed Time
Resolution
License
Copy Range The copy range is displayed. (Totally, Extent)
Secondary Access Permission
Concurrent Suspend Status
Change Error
Remain Time
Transfer mode of the session is displayed. Details are as follows:
Through Mode: Asynchronous Through Mode
Stack Mode: Asynchronous Stack Mode
Consistency Mode: Asynchronous Consistency Mode (a mode that guarantees data
transfer ordering to the connection destination storage system for all the specified REC
sessions)
The recovery mode of the session is displayed only when the type REC is selected.
Automatic: A mode to restart copying automatically when the REC copy path has
recovered from abnormal status.
Manual: A mode not to restart copying automatically when the REC copy path has
recovered from abnormal status.
The split mode of the relevant session is displayed only when the type REC is selected.
Automatic: A mode in which Write I/O accesses to copy source are accepted when the
copy path of REC is in abnormal status.
Manual: A mode in which Write I/O accesses to copy source are accepted when the copy
path of REC is in abnormal status. Specified sense information is sent to the host.
The session ID of another which is remotely connected with this system
The identifier of another which is remotely connected with this system
The previous time stamp backed-up is displayed when the Status is Active or Suspend.
The time that the accident occurred is displayed when the Status is Error Suspend or
Halt.
The elapsed time from starting the session is displayed (unit: day, hour, min, sec).
The resolution of the session is displayed (x2, x4, x8, x16).
The license information of the session is displayed (Regular, Trial, Unknown).
Indicates whether the Secondary area can be accessed when the Status is Active. (Read
Only at Equivalency, No Read/Write)
Transition status of Concurrent Suspend. (Normal, Exec, Error, Unknown)
Execution result of the Change command. (Normal, Mode Change Error, Reverse Error)
Estimated time until the transition to Suspend status is complete.
418
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0