Set Qos-Schedule - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set qos-schedule

set qos-schedule

This command sets the details of the QoS schedule.
■
Syntax
set qos-schedule -schedule-number
[-event-type
{every-day |
every-week,{mon|tue|wed|thu|fri|sat|sun},{mon|tue|wed|thu|fri|sat|sun} |
specific-day,
specific-week,
{mon|tue|wed|thu|fri|sat|sun} | none} ]
[-event-from
[-event-to hhmm
■ Parameter
-schedule-number
-event-type Optional. This parameter specifies the QoS schedule event type.
schedule_number
MMDD R
, |
MM
,{1st|2nd|3rd|4th|last},{mon|tue|wed|thu|fri|sat|sun},
hhmm
]
]
This parameter specifies the QoS schedule number. Multiple QoS schedule numbers can only
be specified when "none" is specified for the "-event-type" parameter. From 0 to 1023 can be
specified.
Example: -schedule-number 1,2
-schedule-number 0-10
-schedule-number 1,2-9
schedule_number
QoS schedule number
every-day The QoS schedule is applied to every day. "every-day" is the only format. A
suboperand is not required.
Example: -event-type every-day
every-week The QoS schedule is applied to every week. This format is "every-week,STA,END".
The start day of the week (STA) and the end day of the week (END) are separated
by a comma (,). The day of the week must be specified in the following format.
The end day of the week must be after the start day of the week. The first day
starts from Monday.
Example: Correct -> -event-type every-week,mon,fri
(from Monday to Friday is OK)
Example: Incorrect -> -event-type every-week,fri,tue
(from Friday to Tuesday is not OK)
Example: Correct -> -event-type every-week,mon,mon
(only Monday is OK)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
388
P2X0-1210-05ENZ0