Fujitsu Eternus DX100 S3 User Manual page 424

Chapter 4 Copy Function Settings and Display
4.1 Advanced Copy Management
4.1.5.1 Path Information File
In order to control the REC, a path information file must be created. This file contains Box IDs, information
identifying ETERNUS DX storage systems and remote adapters, host interface port information for the host
interface adapters installed in the ETERNUS DX. This file is set to RA (Remote Adapter) mode. In the ETERNUS
DX, two different path information file formats are supported; TEXT type and BINARY type.
• TEXT type
Path information is directly described using a text editor or similar tool (details follow). This is the
recommended approach for CLI-use.
• BINARY type
Path information is created and revised using the GUI edit function. This is the recommended approach for
GUI-use.
The contents of a typical REC path information file are as follows:
ETERNUS DX200 S3#1
ETERNUS DX200 S3#2
convert rec-path
The path information type
can be converted with
a CLI command.
Configuration Information for the ETERNUS DX Disk storage system
CLI
Back-up REC Path Information
REC path information file
(BINARY type)
CLI
show backup-rec-path-information
import rec-path
Either type is fine.
FTP server
REC path information file
(TEXT type)
REC path information file
(BINARY type)
ETERNUS DX200 S3#3
GUI
424
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
REC Path Information
show rec-path
show backup-rec-path
REC path information can be
directly described with a text
editor.
REC path information can be
created and revised with a GUI tool.
Storage system
information file
P2X0-1210-05ENZ0