Fujitsu Eternus DX100 S3 User Manual page 580

Chapter 5 System Settings and Display
5.2 Network Management > export ssl-certificate-request
-key-length Optional. This parameter specifies the bit length of the generating SSL server key. Only one
-country-name
-state-province-name
-locality-name
-organization-name
-organization-unit-name
-common-name
value can be specified. If this parameter is omitted, 2048 (default value) is used for the key
length.
1024 Key length is 1024bits.
2048 Key length is 2048bits. (Default value)
4096 Key length is 4096bits.
Specify a country using two uppercase characters. "JP" indicates Japan. For other countries,
refer to ISO3166-1.
country_name
Country name
Specify the state where the organization is located. Up to 63 characters can be specified.
state_province_name
State name
Specify the area where the organization is located. Up to 63 characters can be specified.
locality_name
Area name
Specify the organization name. Up to 63 characters can be specified.
organization_name
Organization name
Specify the department name of the organization. Up to 63 characters can be specified.
organization_unit_name
Department name of the organization.
This parameter specifies an IP address or domain name that accesses HTTPS for the MNT port
or the RMT port. The IP address should be written in IPv4 standard notation (a base 256
"d.d.d.d" string) or IPv6 address format. The domain name should be written in full-domain
notation (FQDN). Only one parameter can be specified.
Example:
foo.var
192.168.1.1
2001:1b::430:db0
common_name
IP address or domain name that accesses HTTPS
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
580
P2X0-1210-05ENZ0