Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set qos-schedule
-event-from Optional. This parameter specifies that the QoS schedule will start at a specific time. The
-event-to
■
Example(s)
The following example creates an QoS schedule. The QoS schedule number is 0. The QoS schedule will apply
every day from 06:00 to 18:00:
CLI> set qos-schedule -schedule-number 0 -event-type every-day -event-from 0600 -event-to 1800
The following example deletes the QoS schedule:
CLI> set qos-schedule -schedule-number 0 -event-type none
format is "hhmm". "hh" is the starting hour (00 – 23) and "mm" is the starting minute (00, 10,
20, 30, 40, or 50).
hhmm
Starting time of the QoS schedule
Optional. This parameter specifies that the QoS schedule will end at a specific time. The format
is "hhmm". "hh" is the ending hour (00 – 23) and "mm" is the ending minute (00, 10, 20, 30,
40, or 50).
hhmm
Ending time of the QoS schedule
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
390
P2X0-1210-05ENZ0