Test Nas-Traceroute - Fujitsu Eternus DX100 S3 User Manual

Chapter 7 NAS Function Setting and Display
7.8 Network Connection Testing > test nas-traceroute

test nas-traceroute

This command displays a packet route to the host.
■
Syntax
test nas-traceroute -host {
■ Parameter
-host
-nas-if-number
■ Example(s)
CLI> test nas-traceroute -host 10.17.78.15 -nas-if-number 0
traceroute to 10.17.78.15 (10.17.78.15), 30 hops max, 40 byte packets
1 10.21.157.1 (10.21.157.1)
2 10.21.191.1 (10.21.191.1)
3 10.16.8.1 (10.16.8.1)
4 10.16.2.2 (10.16.2.2)
5 10.16.106.2 (10.16.106.2)
6 HOST-PC.g01.fujitsu.local (10.17.78.15)
ip_address host_name
|
This parameter specifies the target host, in which the connection is to be checked, using the IP
address or the host name.
ip_address IP address
Example: -host 10.20.30.40
host_name
Host name
Example: -host www.example.com
This parameter specifies the interface from which packets are to be sent.
nas-if-number
Existing NAS interface number
0.525 ms
0.447 ms
0.310 ms 0.398 ms
0.404 ms 0.485 ms
0.467 ms
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
nas-if-number
} -nas-if-number
0.677 ms 0.850 ms
0.904 ms 1.097 ms
0.431 ms
0.573 ms
0.984 ms 1.189 ms
0.755 ms * *
803
P2X0-1210-05ENZ0