Fujitsu Eternus DX100 S3 User Manual page 498

Chapter 5 System Settings and Display
5.2 Network Management > set network
-netmask
-subnet-prefix-length
-gateway
Optional. This parameter specifies the subnet mask for the specified Ethernet port. The format
is IPv4 standard notation (a base 256 "d.d.d.d" string) or IPv6 address format. If omitted, the
existing setting is not changed. This parameter can only be specified when "v4" is specified for
the "-ip-format" parameter.
Example: -netmask 255.255.255.0
netmask
Subnet mask
Optional. This command specifies the prefix length of the connect IP address. This parameter is
used for IPv6 addresses. The prefix length is equivalent to the subnet mask for IPv4 addresses.
Specify a value from 3 to 128. When a global unicast address is specified for the connect IP
address, a value from 3 to 128 can be specified. When a unique local unicast address is
specified for the connect IP address, a value from 7 to 128 can be specified. (When a 6to4
address is used to specify the global unicast address, a value from 48 to 128 can be specified.)
If omitted, the existing setting is not changed. This parameter can only be specified when "v6"
is specified for the "-ip-format" parameter and "disable" is specified for the "-ipv6-set-auto"
parameter. To delete the prefix length, set "0".
Example: -subnet-prefix-length 64
length
Prefix length
For global unicast addresses: 3 – 128
For global unicast addresses (6to4 addresses): 48 – 128
For unique local unicast addresses (6to4 addresses): 7 – 128
Optional. This parameter specifies the gateway address for the specified Ethernet port. This
setting is required to permit access beyond the local sub-network (the sub-network to which
the system network addresses belong). The format is IPv4 standard notation (a base 256
"d.d.d.d" string) or IPv6 address format. The types of IPv6 addresses that can be specified are
local link addresses, global unicast addresses (including 6to4 addresses), and unique local
unicast addresses. If omitted, the existing setting is not changed. This parameter can only be
specified when "v6" is specified for the "-ip-format" parameter and "disable" is specified for the
"-ipv6-set-auto" parameter, or when "v4" is specified for the "-ip-format" parameter.
Example: -gateway 10.1.1.2
Example: -gateway 2001:df:a012::3bbd
gateway
Gateway address
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
498
P2X0-1210-05ENZ0