Fujitsu Eternus DX100 S3 User Manual page 285

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show host-affinity
-lg-number
or
-lg-name
-host-number
or
-host-name
-port-group-number
or
-port-group-name
-host-group-number
or
-host-group-name
■ Output
CM#x CA#y Port#z
Host
Optional. This parameter specifies the LUN group identifiers to be narrowed down. One or
more parameters can be specified at the same time. For details, refer to
Syntax" (page 28). If omitted, this parameter is ignored.
lg_numbers
LUN group number
lg_names
LUN group name
Optional. This parameter specifies the host identifiers to be narrowed down. One or more
parameters can be specified at the same time. For details, refer to
27). If omitted, this parameter is ignored.
host_numbers
Host number
host_names
Host group name
Optional. This parameter specifies the port group identifiers to be narrowed down. One or
more parameters can be specified at the same time. For details, refer to
Syntax" (page 30). If omitted, this parameter is ignored.
port_group_number
Port group number
port_group_name
Port group name
Optional. This parameter specifies the host group identifiers to be narrowed down. One or
more parameters can be specified at the same time. For details, refer to
Syntax" (page 30). If omitted, this parameter is ignored.
host_group_number
Host group number
host_group_name
Host group name
Port number
Host identifiers
No. Host number
Name Host name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
285
"1.2.12 LUN Group
"1.2.11 Host Syntax" (page
"1.2.16 Port Group
"1.2.17 Host Group
P2X0-1210-05ENZ0