Set Odx-Buffer-Volume - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.2 Volume Management > set odx-buffer-volume

set odx-buffer-volume

This command changes the information of the ODX Buffer volume that is registered in the ETERNUS DX.
■
Syntax
set odx-buffer-volume {-volume-number
name
[-name
■ Parameter
-volume-number
or
-volume-name
-name
-priority
-attention
-encryption Optional. This parameter is only enabled when the type of the ODX Buffer volume is Open
ftsp_number
] [-priority { |auto}] [-attention
This parameter specifies the identifier of the ODX Buffer volume for which the settings are to
be changed. Only one volume can be specified at the same time. For details, refer to
Volume Syntax" (page 26).
volume_number
ODX Buffer volume number
volume_name
ODX Buffer volume name
Optional. This parameter specifies the new name for the ODX Buffer volume. For details about
the contents that can be entered, refer to
alias name of the target volume is not changed.
name
ODX Buffer volume name
Optional. This parameter is only enabled when the type of the ODX Buffer volume is FTV.
Specify the FTSP number to set the priority for allocating a Flexible Tier Sub Pool (FTSP) to the
target FTV.
If "auto" is input, the FTSP is automatically allocated. If omitted, the FTSP is not changed.
ftsp_number
FTSP number
auto The FTSP is automatically allocated.
Optional. This parameter is only enabled when the type of the ODX Buffer volume is TPV or FTV.
Specify the threshold (attention level) for the TPV or FTV. From 1% to 100% can be specified. If
omitted, the threshold value is not changed.
attention
Threshold (attention level) for the TPV or FTV
(Standard). Specify this parameter to encrypt a volume. If "enable" is specified, the data of the
specified ODX Buffer volume is encrypted. If this parameter is omitted, "disable" is specified.
enable The data of the ODX Buffer volume is encrypted.
disable No operation.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
volume_number
| -volume-name
attention
] [-encryption {enable | disable}]
"1.2.10 Volume Syntax" (page
165
volume_name
}
"1.2.10
26). If omitted, the
P2X0-1210-05ENZ0