Create Sed-Key-Group - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.3 System Settings > create sed-key-group

create sed-key-group

This command creates a key group.
Only one key group can be created for the ETERNUS DX.
■ Syntax
create sed-key-group -name
[-security-level {low | high}] [-recovery-mode {auto | manual}] [-period {
[-master-server-id {
■
Parameter
-name
-machine-group-name
-security-level
-recovery-mode
-period
name
-machine-group-name
master_server_id
| ""}] [-slave-server-id {
This parameter specifies the key group name. 1 to 32 alphanumeric characters and under-
scores (_) can be specified. Only an alphabetical character can be specified as the first letter.
name
Key group name
This parameter specifies the machine group name. Set the same name as the device group
name in the key server. 1 to 16 alphanumeric characters and underscores (_) can be specified.
Only an alphabetical character can be specified as the first letter.
machine_group_name
Machine group name
Optional. This parameter specifies the security level. If omitted, "high" is set.
high Rebuild or maintenance cannot be performed when communication with the key
server is not available during a disk failure or disk maintenance work in a RAID
group that uses the key group.
low Rebuild or maintenance is performed using the common key when communica-
tion with the key server is not available during a disk failure or disk maintenance
work in a RAID group that uses the key group.
Optional. This parameter specifies whether to automatically perform recovery of a drive or a
RAID group that cannot be communicated with due to blockage of the key server when the
communication recovers. When "manual" is set, recovery work is performed manually by the
user from Web GUI or CLI. If omitted, "auto" is set.
auto Automatic recovery is performed.
manual Automatic recovery is not performed.
Optional. This parameter specifies the valid period of the key. This period can be specified on a
monthly basis by using a number from 1 to 12. Specify a null character ("") or omit this
parameter to not set this period.
period Valid period of the key (1 – 12)
"" The valid period of the key is not set.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
machine_group_name
slave_server_id
645
period | ""}]
| ""}]
P2X0-1210-05ENZ0