Import Ssh-Public-Key - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.1 User Management > import ssh-public-key

import ssh-public-key

For SSH (Secure SHell) connections, passwords or certificate keys can be used for authentication. This
command is used to import a SSH public key into an ETERNUS DX from an FTP server when using the certificate
key method of authentication.
• One certificate key corresponds to a single user account.
• Even if a specific user account is disabled, a key may still be imported.
The key types that are supported are as follows:
• IETF style DSA for SSH v2 (Strength 1024bit, 2048bit, or 4096bit)
• IETF style RSA for SSH v2 (Strength 1024bit, 2048bit, or 4096bit)
■ Syntax
import ssh-public-key -account-name
-port {maintenance | remote | fst} -server
login_user_account
-user
■ Parameter
-account-name
-port
-server
-user
account_name
filename
-filename
This parameter specifies a user account name used for a certificate key for authentication. Only
one user name can be specified at the same time.
account_name
User account name
This parameter specifies which Ethernet port is used to connect to the FTP server. For details,
refer to "1.11 Note for Specifying FTP Server" (page
maintenance
MNT port
remote RMT port
fst FST port (ETERNUS DX500 S3/DX600 S3 only)
This parameter specifies an FTP server name where the public key is stored. The server name
format is IPv4 standard notation (a base 256 "d.d.d.d" string) or a fully qualified domain name.
Example: -server 192.168.1.20
Example: -server foo.bar
server_name
FTP server name
This parameter specifies the user name that is to be used to access the FTP server. When this
parameter is specified, the command displays an FTP server password prompt.
login_user_account
User name that is to be used to access the FTP server
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
server_name
[-indicator {enable | disable}]
35).
481
P2X0-1210-05ENZ0