Fujitsu Eternus DX100 S3 User Manual page 605

Chapter 5 System Settings and Display
5.3 System Settings > show ntp
■ Example(s)
The following example displays the NTP configuration:
CLI> show ntp
NTP
Primary NTP Server
Primary NTP LAN Port
Secondary NTP Server
Secondary NTP LAN Port [MNT]
Access Status [2008-02-21 08:30:00 Primary NTP Server succeeded SYNC]
CLI> show ntp
NTP
Primary NTP Server
Primary NTP LAN Port
Secondary NTP Server
Secondary NTP LAN Port [MNT]
Access Status
CLI> show ntp
NTP
Primary NTP Server
Primary NTP LAN Port
Secondary NTP Server
Secondary NTP LAN Port [MNT]
Access Status
[Enable]
[10.1.1.100]
[RMT]
[10.1.1.200]
[Enable]
[fd80::abd0:223:ad]
[RMT]
[fe80:0000:0000:0000:0280:0001:fe84:6417]
[0000-00-00 00:00:00 failed SYNC]
[Disable]
[10.1.1.100]
[RMT]
[10.1.1.200]
[0000-00-00 00:00:00 Secondary NTP Server succeeded SYNC]
605
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0