Fujitsu Eternus DX100 S3 User Manual page 312

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > create host-group
-host-number
or
-host-name
■ Example(s)
The following example creates a host group. FC is specified for the "host-type" parameter, 10 is specified for
the "host-response-number" parameter, and 1 and numbers 3 to 5 are specified for the "host-number"
parameter:
CLI> create host-group -name HG001 -host-type fc -host-response-number 10 -host-number 1,3-5
This parameter specifies the host identifiers to be associated. One or more parameters can be
specified at the same time. For details, refer to
host_numbers
Host number
host_names
Host name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
"1.2.11 Host Syntax" (page
312
27).
P2X0-1210-05ENZ0