Pool Status (Tpp/Ftrp/Ftsp Status); Raid Group Status - Fujitsu Eternus DX100 S3 User Manual

Appendix E Status List
E.5 Pool Status (TPP/FTRP/FTSP Status)
Partially Exposed
Not Ready
Broken
Data Lost
Not Available
Unknown
E.5

Pool Status (TPP/FTRP/FTSP Status)

The meaning of each pool status is described below.
Available
Maintenance
Readying
Part Readying
Exposed
Broken
Data Lost
Unknown
E.6

RAID Group Status

The meaning of each RAID group status is described below.
Available
Spare in Use
Readying
Rebuild
Status
One of the disks that configure the RAID group to which the volume belongs has
failed.
This status is displayed only when the type of the RAID group to which the
volume belongs is "High Reliability (RAID6)".
The RAID group to which the volume belongs is blocked.
The volume is broken.
Data in the volume is lost. Reading or writing of data cannot be performed.
The volume is not defined or has not been installed.
A status other than the ones listed above.
Status
The pool is operating normally.
Forcible recovery of the pool is being performed.
All the physical area in the pool is not formatted.
Some parts of the physical area in the pool are not formatted.
The pool is available.
The "Exposed" status of the pool is displayed not only when the RAID group that
configures the pool has lost redundancy and is in "Exposed" status, but also
when the RAID group maintains redundancy in "Spare in Use" status. The
"Exposed" status of pool indicates that the RAID group in the pool is not in
normal status because of any causes such as the disk failure.
The pool is broken.
Data in the pool is lost. Reading or writing of data cannot be performed.
A status other than the ones listed above.
Status
The RAID group is operating normally.
Rebuilding to the hot spare disk is complete. The RAID group manages
redundancy by using the hot spare disk.
The RAID group that is registered as an REC Disk Buffer is not formatted.
This status is displayed only for a RAID group that is registered as an REC Disk
Buffer.
Rebuilding from a failed data disk to the hot spare disk or to the replaced disk is
being performed in the RAID group.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Description
Description
Description
934
P2X0-1210-05ENZ0