Chapter 3 Configuration Settings And Display; Raid Group Management; Raid Group - Fujitsu Eternus DX100 S3 User Manual

Chapter 3
Configuration Settings and Display
This chapter explains the commands used for basic settings of the storage system. These settings include RAID
group management, volume management, Thin Provisioning Pool management, Flexible Tier management,
and host interface management.
3.1

RAID Group Management

This chapter explains the commands used for the following settings:
• RAID group settings
• Hot spares settings
• Eco-mode settings
3.1.1

RAID Group

This section explains the commands used for RAID group management.
All disks contained in a RAID group must be the same disk type.
The functions to control RAID groups are as follows:
• Creating a RAID group
• Deleting RAID groups
• Changing an existing RAID group
• LDE, Logical Device Expanding (expanding a RAID group)
69
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0