Show Volume-Mapping - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.2 Volume Management > show volume-mapping

show volume-mapping

This command displays the LUNs (Logical Unit Numbers) that are mapped to volumes.
■
Syntax
show volume-mapping
[-volume-number
■ Parameter
-volume-number
or
-volume-name
-mode
■
Output
Volume
Type
UID
LUN
LUN Group
volume_numbers
| -volume-name
Optional. This parameter specifies the volume identifiers. One or more parameters can be
specified at the same time. If the volume identifier is omitted, a list of all the volumes is
displayed. For details, refer to
volume_numbers
Volume number
volume_names
Volume name
Optional. This parameter toggles the extended output mode. If the mode is omitted, "default"
is set.
all In addition to the normal display items, the information of the LUNs that can be
accessed from the host of each connected CA port is also displayed.
host-lun Only the information of the LUNs that can be accessed from the host of each
connected CA port is displayed.
default A list of all of the volumes is displayed.
Volume identifiers
No. Volume number
Name Volume name
Volume type
Volume UID (Universally Unique Identifier)
LUN
LUN group identifiers
No. LUN group number
Name LUN group name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
volume_names
] [-mode {all| host-lun | default}]
"1.2.10 Volume Syntax" (page
117
26).
P2X0-1210-05ENZ0