Fujitsu Eternus DX100 S3 User Manual page 286

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show host-affinity
LUN Group
LUN Overlap Volumes
When a host affinity is set for the port group (Host Affinity Mode is enabled)
Port Group
Host Group
LUN Group
LUN Overlap Volumes
Connection List
When a host affinity is set for the port group (Host Affinity Mode is disabled)
Port Group
LUN group identifiers
No. LUN group number
Name LUN group name
Indicates whether the same volume identifier is defined between LUN groups or that a
LUN mapping is set for the volume. If the same definitions exist, "Yes" is displayed for
the target LUN groups. Otherwise, "No" is displayed.
Port group identifiers
No. Port group number
Name Port group name
Host group identifiers
No. Host group number
Name Host group name
LUN group identifiers
No. LUN group number
Name LUN group name
Indicates whether the same volume identifier is defined between LUN groups or that a
LUN mapping is set for the volume. If the same definitions exist, "Yes" is displayed for
the target LUN groups. Otherwise, "No" is displayed.
List of connections
Port Port number
Host Host identifiers
No.
Name
Port group identifiers
No. Port group number
Name Port group name
286
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Host number
Host name
P2X0-1210-05ENZ0