Fujitsu Eternus DX100 S3 User Manual page 564

Chapter 5 System Settings and Display
5.2 Network Management > set event-notification
-method
-suppression
-host-sense-opmsg
i-out-of-nas-capacity
Information level events about the NAS volume capacity are notified. SNMP, E-
mail, syslog, and AIS Connect may be specified as the notice method. This option
can be specified when the NAS function is enabled.
i-out-of-nas-file-management-domain
Information level events about the NAS directory are notified. SNMP, E-mail,
syslog, and AIS Connect may be specified as the notice method. This option can
be specified when the NAS function is enabled.
i-storage-cluster-controller-connected
When the Storage Cluster Controller is restored, information level events are
notified. SNMP, E-mail, syslog, and AIS Connect may be specified as the notice
method.
This parameter specifies the notification method. One or more methods can be specified by
separating them with a comma (,). This parameter cannot be specified in conjunction with the
preset function.
Example: -method email,snmp (Specify "E-mail" and "SNMP")
email E-mail
snmp SNMP trap
host Host sense
remcs REMCS (remote support)
syslog syslog
ais AIS Connect
This parameter specifies the suppression mode. It sets whether the specified event level and
notice method are notified. This parameter cannot be specified in conjunction with the preset
function.
Set "-suppression on" for events that should not be notified.
enable Not notified (Suppression is enabled)
disable Notified
disable-when-no-hs
Notified when no hot spare exists.
Optional. This parameter is only usable when "host" parameter is specified for "-method" and
"disable" or "disable-when-on-hs" is specified for "-suppression".
enable Notification is through an operator message.
disable Notification is not through an operator message.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
564
P2X0-1210-05ENZ0