Appendix F Default Value List - Fujitsu Eternus DX100 S3 User Manual

Appendix F
Default Value List
The default values for commands are shown below.
Figure F.1 List of the default values for RAID group management commands
create raid-group
Figure F.2 List of the default values for Eco-mode management commands
set eco-mode
create eco-schedule
Figure F.3 List of the default values for volume management commands
create volume
set volume
Figure F.4 List of the default values for Flexible Tier Volume management commands
create flexible-tier-volume
set flexible-tier-volume
Figure F.5 List of the default values for ODX buffer volume management commands
create odx-buffer-volume
Figure F.6 List of the default values for Extreme Cache management commands
set extreme-cache
Command
Command
mode
event-type
Command
Command
Command
Command
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Parameter
assigned-cm
Parameter
Parameter
attention
exc
alua
Parameter
attention
alua
Parameter
attention
Parameter
initial-caching-threshold
caching-threshold
937
Default value
auto
Default value
disable
every-day
Default value
80%
enable (when the volume type is Open,
Standard, WSV, TPV (including nas-tpv and
nas-tpv-backup))
disable (when the volume type is sdv or
sdpv, or when RAID group, or pool is con-
figured with the SSD)
follow-host-response
Default value
80%
follow-host-response
Default value
80%
Default value
1
5
P2X0-1210-05ENZ0