Fujitsu Eternus DX100 S3 User Manual page 292

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set host-affinity
-host-group-number
or
-host-group-name
or
-host-response-number
or
-host-response-name
The available combinations for optional parameters are shown below.
Parameter
-port
-lg-number (-ag-number)
-lg-name (-ag-name)
-host-number
-host-name
-port-group-number
-port-group-name
-host-group-number
-host-group-name
-host-response-number
-host-response-name
No: Not available R: Required Yes: Available (the options can be omitted) *: Either one of these options
must be specified
*1: Both of the parameter combinations can be omitted when a path is set in a host affinity that is already set with a
port group. Therefore, an error occurs when a LUN group is not specified and the port group and the host group are
not associated with the host affinity setting.
*2: The "-lg-number" parameter or the "-lg-name" parameter cannot be specified when LUN mapping is already set with
a port group and the host response for LUN mapping will be changed. Therefore, a host response must be specified
when a LUN group is not specified ("Default" must be specified to set the default host response).
This parameter specifies the host group number, the host group name, the host response
number, or the host response name. Only one host group or host response can be specified at
the same time. For details, refer to
Group Syntax" (page 30).
host_group_numbers
Host group number
host_group_names
Host group name
host_response_number
Host response number
host_response_name
Host response name
—
R —
R No
R
R
No
No
No
No
No
No
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
"1.2.13 Host Response Syntax" (page 28)
* (*1) * No
No * No
— * No
* (*1) — No No
* (*1) No — No
* No No
* No No No
* No No
* No No
* (*2) No No
* (*2) No No
292
and "1.2.17 Host
No No No
No No No
No No No
No No No
No No No
— No *
— *
* — No
* No —
* No No
* No No
P2X0-1210-05ENZ0
No No
No No
No No
No No
No No
*
*
No No
No No
— No
No —