Set Flexible-Tier-Volume - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.2 Volume Management > set flexible-tier-volume

set flexible-tier-volume

This command modifies the information for the Flexible Tier Volumes (FTVs) that are already registered in the
ETERNUS DX.
■ Syntax
set flexible-tier-volume {-volume-number
[-name name
uid
[-uid | default | original] [-alua {follow-host-response | active | passive}]
■
Parameter
-volume-number
or
-volume-name
-name
-priority
-attention
-copy-protection
] [-priority { ftsp_number |auto}] [-attention
This parameter specifies the FTV identifier for which the settings are to be changed. Only one
parameter can be specified in a single command. For details, refer to
(page 26).
volume_number
Volume number
volume_name
Volume name
Optional. This parameter specifies the new name of the target FTV. For details, refer to
Volume Syntax" (page 26). If omitted, the alias name of the target FTV remains unchanged.
name FTV name
Optional. This parameter specifies the FTSP number of the Flexible Tier Sub Pool (FTSP) to
which the target FTV is preferentially allocated.
If "auto" is specified for this parameter, the allocated FTSP is determined automatically. If
omitted, this parameter is not changed.
ftsp_number
FTSP number
auto The allocated FTSP is determined automatically.
Optional. This parameter specifies the threshold (Attention) for the target FTV. A value
between 1% and 100% can be set. If omitted, this parameter is not changed.
attention Threshold (Attention) for the target FTV
Optional. This parameter prevents the FTV from being specified as the copy destination. When
"enable" is specified, the target FTV cannot be specified as the copy destination. When
"disable" is specified, the target FTV can be specified as the copy destination. If omitted, the
setting remains unchanged.
enable The FTV is protected.
disable The FTV is not protected.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
volume_number
| -volume-name
attention ] [-copy-protection {enable | disable}]
151
volume_name
}
"1.2.10 Volume Syntax"
"1.2.10
P2X0-1210-05ENZ0