Import Ssl-Kmip-Certificate - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.3 System Settings > import ssl-kmip-certificate

import ssl-kmip-certificate

This command imports and registers in the ETERNUS DX the server certificate that is signed by a certificate
provider.
■ Syntax
import ssl-kmip-certificate -port {maintenance | remote | fst} -server
-user login_user_account
■ Parameter
-port
-server
-user
-filename
-indicator
-filename filename
This parameter specifies which Ethernet port is used to connect to the FTP server. For details,
refer to "1.11 Note for Specifying FTP Server" (page
maintenance
MNT port
remote RMT port
fst FST port (not supported in the ETERNUS DX100 S3/DX200 S3 or the ETERNUS
DX200F)
This parameter specifies the FTP server name in which the certificate file is to be stored. The
server name format is IPv4 standard notation (as a string in the base 256 notation d.d.d.d),
IPv6 address format or a fully qualified domain name (FQDN).
Example: -server 192.168.1.20
Example: -server fd80::abd0:223:ad
Example: -server foo.bar
server_name
FTP server name
This parameter specifies the user name that is to be used to access the FTP server. When this
parameter is specified, the command displays an FTP server password prompt.
login_user_account
User account name
This parameter specifies the certificate file name.
filename Certificate file name
Optional. This parameter specifies whether the progress indicator is displayed. If omitted, the
progress indicator is displayed.
enable Progress indicator is displayed.
disable Progress indicator is not displayed.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
server_name
[-indicator {enable | disable}]
35).
641
P2X0-1210-05ENZ0