Fujitsu Eternus DX100 S3 User Manual page 382

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show host-lu-qos
The following example displays the details of the Host QoS settings:
CLI> show host-lu-qos -mode host-qos -host type iscsi -host-number 0
Host
No. Name
---- ---------------- --------------- --------- --------------------------
0 Host#iSCSI_0
<Event>
No. Schedule No. Bandwidth Limit
--- ------------ ---------------
1
3
The following example displays the LU Host-LU QoS settings:
CLI> show host-lu-qos-parameters -mode lu-qos
Port (Bandwidth Limit) Host
---------------------- ---- ---------------------- ----------------------
CM#0 CA#0 Port#0 (15)
CM#0 CA#0 Port#0 ( 0)
CM#0 CA#0 Port#0 ( 0)
CM#0 CA#0 Port#0 ( 0)
CM#0 CA#0 Port#0 ( 0)
CM#0 CA#0 Port#0 ( 0)
CM#0 CA#0 Port#0 ( 0)
Bandwidth Limit Host Type WWN/iSCSI Name/SAS Address
5 iSCSI
2 3
4 14
(Bandwidth Limit)
No. Name
0 HBA1
0 Host#FC_0
0 Host#FC_0
0 Host#FC_0
2 Host#FC_1
2 Host#FC_1
2 Host#FC_1
382
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
iqn.1991-05.com.microsoft
LUN (Bandwidth Limit)
( 0) 0 ( 0)
( 0) 0 ( 0)
( 0) 1 ( 0)
( 0) 2 ( 0)
( 1) 0 ( 5)
( 1) 1 ( 5)
( 1) 2 ( 6)
P2X0-1210-05ENZ0