Fujitsu Eternus DX100 S3 User Manual page 501

Chapter 5 System Settings and Display
5.2 Network Management > set network
The following example sets the IP address in IPv6 address format:
CLI> set network -port maintenance -ip-format v6 -ipv6-set-auto disable -master-link-local-ip
fe80:10:20:34:ab::55:234:abde -slave-link-local-ip fe80:20:31:abcf:f3f::78:4fa -master-connect-ip
2010:df:90a::55:33:234 -slave-connect-ip 2011:23:ab:345:77::32:12a -subnet-prefix-length 64 -gateway
2010:df:90a::52:ab:d3e -allow-ip1 2001:ab:df:23f::abc:56:2 -allow-ip2 2001:234::,64 -primary-dns-ip
2011:ab:def:190::900:32:a80 -secondary-dns-ip 2011:91:aa9::7ab:74:dd
The following example automatically sets the IP address in IPv6 format:
CLI> set network -port maintenance -ip-format v6 -ipv6-set-auto enable
501
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0