Fujitsu Eternus DX100 S3 User Manual page 341

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show host-lu-qos-performance
Throughput(MB/s)
Delay Time(ms)
LUN
IOPS
Throughput(MB/s)
Delay Time(ms)
When the port type that is described above is iSCSI and a host without an IP address is specified,
performance measurement information is obtained from multiple IP address. When an IP address is not
specified, "IP Address: host IP address" shows the actual IP address of the host that is logged in to the
ETERNUS DX.
Transfer amount per second for a host (in MB/s)
Ave Average transfer amount per second for a host
Min Minimum transfer amount per second for a host
Max Maximum transfer amount per second for a host
Delay time (in milliseconds)
Total Accumulated delay time for the start of a command due to the QoS control
of a host.
"Overflow" is displayed when a long time passes from the start of
performance measurement to the end of performance measurement and
the accumulated delay time exceeds the limit.
Ave Average delay time for a single command due to the QoS control of a host
LUN number
Number of I/Os per second for a LUN
Ave Average number of I/Os per second for a LUN
Min Minimum number of I/Os per second for a LUN
Max Maximum number of I/Os per second for a LUN
Transfer amount per second for a LUN (in MB/s)
Ave Average transfer amount per second for a LUN
Min Minimum transfer amount per second for a LUN
Max Maximum transfer amount per second for a LUN
Delay time (in milliseconds)
Total Accumulated delay time for the start of a command due to the QoS control
of a LUN.
"Overflow" is displayed when a long time passes from the start of
performance measurement to the end of performance measurement and
the accumulated delay time exceeds the limit.
Ave Average delay time for a single command due to the QoS control of a LUN
341
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0