CHAIN DRIVE/DRIVE SYSTEM
29. Remove the front hub and sprocket assembly from
the axle (Fig. 0329).
30. Repeat steps 13 – 28 to remove the front wheel,
chain, hub and sprocket from the opposite side of
the machine.
31. Using a 3/4" socket and wrench, remove the 4 bolts,
washers and nuts securing the 2 axle brackets to the
main frame (Fig. 0330).
4/1-16
DSC-0302a
Fig. 0329
DSC-0509a
Fig. 0330
32. Using a 1-1/4" socket, loosen the jam nuts on the 2
chain tensioning bolts (Fig. 0331).
33. Remove the front axle assembly from the main
frame (Fig. 0332).
Toro Wheeled CUL Service Manual
DSC-0518a
Fig. 0331
DSC-0519a
Fig. 0332