Toro 22317 Service Manual page 213

CHAIN DRIVE/HYDRAULICS
3. Install a shoulder bolt to secure the pivot pin. Torque
the shoulder bolt to 150 – 170 in-lbs. (17 - 20 Nm)
(Fig. 0695).
4. Install the hydraulic lines to the tilt cylinder fittings
(Fig. 0696).
Note: Use double wrenches to prevent the fittings
from spinning and twisting the hose.
4/2-44
Fig. 0695 DSC-2877a
Fig. 0696 DSC-2879a
5. Lift the attach plate and align the cylinder ram to the
attach plate. Install a pivot pin (Fig. 0697).
6. Install a shoulder bolt to secure the pivot pin. Torque
the shoulder bolt to 150 – 170 in-lbs. (17 – 20 Nm)
(Fig. 0698).
Toro Wheeled CUL Service Manual
Fig. 0697 DSC-2855a
Fig. 0698 DSC-2882a