20. Apply grease to the ball on all 4 operator assemblies
(Fig. 0138).
21. Position a gasket between the 4 operator assemb-
lies and the valve body. Install the 4 operator
assemblies to the valve body (Fig. 0139).
Toro Wheeled CUL Service Manual
IMG-0480a
Fig. 0138
IMG-0482a
Fig. 0139
ALL UNITS/GENERAL
22. Lubricate the 4-spool return springs and install them
to the 4-spools (Fig. 0140).
23. Position a gasket between the 4 return spring covers
and the valve body. Install the 4 return spring covers
to the valve body (Fig. 0141).
IMG-0514a
Fig. 0140
IMG-0516a
Fig. 0141
3/1-39