CHAIN DRIVE/DRIVE SYSTEM
Front Axle Installation
1. Thread a jam nut onto each of the chain tensioning
bolts approximately 3/4 of the way up the threads
(Fig. 0337).
2. Slide 2 washers up to the jam nut on each of the
chain tensioning bolts (Fig. 0338).
4/1-18
DSC-0538a
Fig. 0337
DSC-0540a
Fig. 0338
3. Apply anti-seize compound to the 2 chain tensioning
bolts (Fig. 0339).
4. Position an axle bracket to the axle aligning it with
the chain tensioning bolt mounting holes. Insert the
chain tensioning bolt through the axle bracket and
thread it into the axle (Fig. 0340).
Toro Wheeled CUL Service Manual
DSC-0541a
Fig. 0339
DSC-0545a
Fig. 0340