CHAIN DRIVE/HYDRAULICS
Hydraulic Filter Head Installation
1. Install the straight fitting and the 45º elbow fitting
(leave loose, do not tighten) on the filter head
assembly (Fig. 0630).
Note: The body of the filter head assembly has
arrows on it. The arrows should be pointing
toward the straight fitting.
2. Install the filter head assembly into the hydraulic
tank return port (Fig. 0631).
4/2-26
Fig. 0630
DSC-2954a
Fig. 0631
DSC-2942a
3. Tighten the straight fitting with a wrench (Fig. 0632).
4. With the hose clamp on the hydraulic fluid return
hose, slide the hydraulic fluid return hose on the
45º elbow fitting. Tighten the 45º elbow fitting (Fig.
0633).
Toro Wheeled CUL Service Manual
Fig. 0632
DSC-2939a
Fig. 0633
DSC-2957a