Toro 22317 Service Manual page 238

40. Using a 13mm socket, remove the bolt securing the
ground wire to the engine (Fig. 0779).
41. Using a 13mm socket, remove the nut securing the
positive battery cable and the red harness wire to
the starter solenoid (Fig. 0780).
Toro Wheeled CUL Service Manual
CHAIN DRIVE/GAS ENGINE
Fig. 0779 DSC-0656a
Fig. 0780 DSC-0658a
42. Remove the positive battery cable from the starter
solenoid (Fig. 0781).
43. Remove the red harness wire from the starter
solenoid (Fig. 0782).
Fig. 0781 DSC-0660a
Fig. 0782 DSC-0661a
4/4-9