Toro 22317 Service Manual page 128

6. Remove the rear wheel from the rear hub (Fig.
0384).
7. Using a 3/4" socket and wrench, loosen the 4 nuts
and bolts securing the axle retaining bracket to the
main frame (Fig. 0385).
Toro Wheeled CUL Service Manual
CHAIN DRIVE/DRIVE SYSTEM
DSC-0195a
Fig. 0384
DSC-0125
Fig. 0385
8. Using a 1-1/4" wrench, loosen the jam nut on each
of the 2 chain tensioning bolts (Fig. 0386).
9. Using a 1-1/8" socket, loosen the 2 chain tensioning
bolts. Continue to loosen the tensioning bolts until
there is adequate slack in the chain to release the
master link (Fig. 0387).
DSC-0125a
Fig. 0386
DSC-0131a
Fig. 0387
4/1-31