4-PAW GAS/HYDRAULICS
8. Using a 1-1/8" offset wrench, tighten the 3 hydraulic
hard lines to the counterbalance valve fittings (Fig.
1045).
9. Position the hydraulic hard line marked F to the
counterbalance valve and bulkhead fitting. Using a
1-1/8" offset wrench, install the hydraulic line nut to
the bulkhead fitting (Fig. 1046).
5/2-20
Fig. 1045
DSC-1081a
Fig. 1046
DSC-1084a
10. Using a 1-1/8" offset wrench, install the other end
of the hydraulic hard line marked F to the counter-
balance valve fitting (Fig. 1047).
11. Position the battery tray in the main frame (Fig.
1048).
Toro Wheeled CUL Service Manual
Fig. 1047
DSC-1083a
Fig. 1048
DSC-1043a