Toro 22317 Service Manual page 532

19. Remove the fan belt from the upper pulley (Fig.
1842).
20. Using a 1/2" socket, remove the 4 pump mount
assembly mounting bolts and lock washers (Fig.
1843).
Note: The bottom 2 mounting bolts are located
below the pump mount opening. They bolt the
bottom of the plate to the engine block.
Toro Wheeled CUL Service Manual
Fig. 1842 DSC-1628a
Fig. 1843 DSC-1640a
4-PAW DIESEL/ENGINE
21. Remove the pump mount/idler assembly (Fig. 1844).
22. To service the pump mount idler assembly, refer to
"Pump Mount Assembly Rebuild" on page 6/4-103.
23. Remove the fan belt (Fig. 1845).
Fig. 1844 DSC-1643a
Fig. 1845 DSC-1644a
6/4-65