Toro 22317 Service Manual page 298

21. Set hydraulic line fitting marked F to the side.
22. Using a 1-1/8" offset wrench, remove the hydraulic
line nut from the front lower counterbalance valve
fitting (Fig. 0988).
23. Using a 1-1/8" offset wrench, remove the hydraulic
line nut from the bottom fitting on the counterbalance
valve (Fig. 0989).
Toro Wheeled CUL Service Manual
Fig. 0988 DSC-0991a
Fig. 0989 DSC-0995a
4-PAW GAS/HYDRAULICS
24. Using a 1-1/8" offset wrench, remove the hydraulic
line nut from the top fitting on the counterbalance
valve (Fig. 0990).
25. Using a 7/16" socket and wrench, remove the nut
from the bolt securing the counterbalance valve to
the frame (Fig. 0991).
Fig. 0990 DSC-0996a
Fig. 0991 DSC-0998a
5/2-5