CHAIN DRIVE/HYDRAULICS
Counterbalance Valve Installation
1. Position the counterbalance valve into the machine
aligning the valve fittings with the existing hydraulic
lines (Fig. 0556).
2. Loosely install the hydraulic line nut to the lower rear
counterbalance valve fitting (Fig. 0557).
4/2-6
Fig. 0556
DSC-0490a
Fig. 0557
DSC-0493a
3. Loosely install the hydraulic line nut to the rear upper
counterbalance valve fitting (Fig. 0558).
4. Loosely install the hydraulic line nut to the front
upper counterbalance valve fitting (Fig. 0559).
Toro Wheeled CUL Service Manual
Fig. 0558
DSC-0497a
Fig. 0559
DSC-0500a