25. Slide a washer onto a shoulder bolt. Slide the idler
pulley onto the shoulder bolt with the hub facing
away from the washer. Slide a spacer onto the bolt
(Fig. 2006).
A
A. Spacer
B. Pulley
26. Install the tensioner arm assembly onto the pump
mount assembly. Install a nut to secure the idler
pulley to the tensioner arm (Fig. 2007).
Toro Wheeled CUL Service Manual
D
B
C
Fig. 2006
IMG-0658a
C. Washer
D. Bolt
Fig. 2007
IMG-0659a
4-PAW DIESEL/ENGINE
Fan Drive Pulley, Rubber Coupler &
Flywheel Adapter Replacement
Fan Drive Pulley, Rubber Coupler &
Flywheel Adapter Removal
1. Remove the hydraulic tandem pump. Refer to
"Hydraulic Tandem Pump Removal" on page 6/2-53.
2. Remove the fan belt from the driven fan pulley (Fig.
2008).
Fig. 2008
DSC-1628a
6/4-109