Toro 22317 Service Manual page 84

46. Install the 5gpm pump driven gear into the pump
assembly (Fig. 0221).
47. Making note of the markings on the 5gpm assembly,
slide the outer bushing into place over the gears
(Fig. 0222).
Note: The pump shaft may have to rotate to seat the
5 gpm pump bushing onto the drive link.
Toro Wheeled CUL Service Manual
IMG-0271a
Fig. 0221
IMG-0273a
Fig. 0222
ALL UNITS/GENERAL
48. Install an o-ring in the cover mounting surface of the
housing (Fig. 0223).
49. Install the housing cover onto the housing (Fig.
0224).
IMG-0274a
Fig. 0223
IMG-0276a
Fig. 0224
3/1-61