4-PAW DIESEL/DRIVE SYSTEM
26. Using a 1/1/8" wrench, remove the lower hydraulic
line from the lower wheel motor fitting (Fig. 1291).
27. Allow the fluid to drain into the drain pan (Fig. 1292).
6/1-18
DSC-0854a
Fig. 1291
DSC-0856a
Fig. 1292
28. Using a1-1/16" socket, loosen the 2 wheel motor
fittings (Fig. 1293).
29. Cap the hydraulic lines and fittings to prevent debris
from contaminating the system.
30. Support the wheel motor with a floor jack (Fig.
1294).
Toro Wheeled CUL Service Manual
DSC-0857a
Fig. 1293
DSC-0859a
Fig. 1294