Toro 22317 Service Manual page 144

4. If a cup bearing race needs replacing, remove it by
tapping it out of the hub with a punch (Fig. 0442).
5. When installing a cup bearing race use a brass
punch or soft metal punch to drive it in. Make sure it
is seated completely (Fig. 0443).
Toro Wheeled CUL Service Manual
CHAIN DRIVE/DRIVE SYSTEM
IMG-0564a
Fig. 0442
IMG-0563a
Fig. 0443
6. Pack the inner bearing with grease and install to the
seal side of the hub (Fig. 0444).
7. Install the seal with the cupped side facing out (Fig.
0445).
IMG-0568a
Fig. 0444
IMG-0569a
Fig. 0445
4/1-47