Toro 22317 Service Manual page 309

4-PAW GAS/HYDRAULICS
24. Using a 1-1/8" offset wrench, remove the hydraulic
line nut from the front counterbalance valve fitting
(Fig. 1029).
25. Set the hydraulic line marked F to the side.
26. Using a 1-1/8" offset wrench, remove the hydraulic
line nut from the rear counterbalance valve fitting
(Fig. 1030).
5/2-16
Fig. 1029 DSC-1051a
Fig. 1030 DSC-1053a
27. Using a 1-1/8" offset wrench, remove the hydraulic
line nut from the bottom fitting on the counterbalance
valve (Fig. 1031).
28. Using a 1-1/8" offset wrench, remove the hydraulic
line nut from the top fitting on the counterbalance
valve (Fig. 1032).
Toro Wheeled CUL Service Manual
Fig. 1031 DSC-1058a
Fig. 1032 DSC-1060a